|
Name/SKU
|
Price
|
|
IPC Interproximal Carver DE with Regular Handle.
|
|
|
Carver DE, IPC-A (Angled). Thin, flexible blades allow for easy placement and shaping. Double-End, Single instrument.
|
|
|
Nordent #138 Frahm-Acorn Double End Carver, Combines a Unique Carver with an Acorn Burnisher, Both Tips are 3.1mm Wide and have the same blade angle
|
|
|
#3 Double End Large Cleoid-Discoid Carver, 3.4mm Blade Width on Both Ends, Hardened Stainless Steel with a Stainless Steel DuraLite ColorRings Handle.
|
|
|
#4-5 Double End Cleoid Discoid Carver, 1.5mm Cleoid Tip/2.4mm Discoid Tip Diameters, Hardened Stainless Steel With a Stainless Steel DuraLite ColorRin
|
|
|
#3 Hollenback Double End Carver, 9.5mm Long/1.7mm Wide Spear-Shaped Blades, Hardened Stainless Steel with a Stainless Steel DuraLite ColorRings Handle
|
|
|
#3S Hollenback Double End Carver, 6.5mm Long/1.5mm Wide Spear-Shaped Blades, Hardened Stainless Steel with a Stainless Steel DuraLite ColorRings Handl
|
|
|
Ultra-Fine IPC Interproximal Double End Carver, Flat Blades are 10mm Long, 1.5mm Wide and 0.4mm Thick, Spring Tempered Stainless Steel Tips With a Sta
|
|
|
IPC-A Interproximal Double End Carver, Blades are 9mm Long, 1.8mm Wide and 0.5mm Thick off-set 40 degrees, Stainless Steel with a Stainless Steel Dura
|
|
|
#7 Levy Double End Carver, 10mm Long/0.9mm Wide Blades Curved and Tapered to a Sharp Point, Hardened Stainless Steel With a Stainless Steel DuraLite C
|
|
|
#1 Loma Linda University Double End Carver, Blades are 7.5mm Long/1.3mm Wide/0.4mm Thick and Sharp around the Entire Periphery, Spring Tempered Stainl
|
|
|
Nordent #133 Double End Carver, Combines 2.4mm Discoid #89 and Hollenback #3S, Hardened Stainless Steel with a Stainless Steel DuraLite ColorRings Han
|
|
|
#8 Shoshan Double End Carver, Flame end is 2.4mm Wide and Tapers to a Point, Elongated Discoid End is 2.5mm Wide/6.5mm Long, Also Known as Shoshan A
|
|
|
#5 Tanner Double End Carver, 3.4mm Wide Cleoid Blade Combined with a 4.2mm Wide Mushroom-Shaped Discoid Blade, Hardened Stainless Steel with a Stainle
|
|
|
#18 IPC Double End Carver, Mirror Image Thin Sickle-Shaped Offset Blades, Hardened Stainless Steel With a Stainless Steel DuraLite ColorRings Handle.
|
|
|
#1S Ward Double End Carver, Flat Spear-shaped Blades 9mm Long/1.7mm Wide set at 20 degrees and 55 degrees, Hardened Stainless Steel With Stainless a S
|
|
|
#2 Ward Double End Carver, One end has flat rounded tip 9.5mm Long/2.5mm Wide set at 45 degree, Other end has Pear-shaped Blade 12mm Long/2mm Wide set
|
|
|
#3 Wall Double End Carver, Elongated Discoid Blade 2.8mm Wide/6.5mm Long and Chisel Carver Blade 4.3mm Wide/6mm Long, Hardened Stainless Steel With a
|
|
|
WACD Double End Cleoid Discoid-Modified Carver, 3.4mm Wide Straigth Shank Cleoid Combined with 2.5mm Wide/6.5mm Long Elongated Discoid, Hardened Stain
|
|
|
#1/2 DE Cleoid-Discoid Carver with Regular Handle.
|
|
|
#3/6 Cleoid/Discoid Carver DE with Regular Handle.
|
|
|
#3/6 double end Cleoid-Discoid Carver with #6 Satin Steel Handle.
|
|
|
#4/5 Cleoid-Discoid Carver/Wax Carver with Regular Handle.
|
|
|
#4/5 double end Cleoid-Discoid Carver with #6 Satin Steel Handle.
|
|
|
#89/92 Cleoid-Discoid Carver/Wax Carver DE with Regular Handle.
|
|
|
#89/92 double end Cleoid-Discoid Carver with #6 Satin Steel Handle.
|
|
|
WACD Cleoid-Discoid Carver DE with Regular Handle.
|
|
|
#1 Andrew DE Carver with #41 Round Handle.
|
|
|
#2 Andrew DE Carver with #41 Round Handle.
|
|
|
#3 Andrew DE Carver with #41 Round Handle.
|
|
|
#2/3 Frahm Carver DE with Regular Handle.
|
|
|
1/2-3 Hollenback / Small Modified Cleoid Carver with #41 Round Handle.
|
|
|
#1 DE Hollenback Carver with regular handle.
|
|
|
#1/2 DE Hollenback Carver with Regular Handle.
|
|
|
#1/2 double end Hollenback carver with #6 Satin Steel Handle.
|
|
|
#2 double end Hollenback carver with regular handle.
|
|
|
#3 Hollenback Carver DE with Regular Handle.
|
|
|
#3S DE Hollenback Carver/Wax Carver with Regular Handle.
|
|
|
#3S double end Hollenback carver with #6 Satin Steel Handle.
|
|
Interproximal DE Carver/Wax Carver with Regular Handle.
|
|
|
Interproximal double end carver with #6 Satin Steel Handle.
|
|
|
Interproximal off angle double end carver with regular handle.
|
|
|
L7 Double End Carver Eith Standard Handle.
|
|
|
Shoshan A Carver/Wax Carver DE with Regular Handle.
|
|
|
#1 double end Tharp carver with regular handle.
|
|
|
#2 Tharp DE Carver with #41 Round Handle.
|
|
|
#8 double end Wiland carver with regular handle.
|
|
|
#8 double end Wiland carver with #6 Satin Steel Handle.
|
|
|
#1 Walls Carver DE with Regular Handle.
|
|
|
#3 Walls Carver DE with Regular Handle.
|
|
